Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:agenda2021_09_16 [2021/09/16 13:27]
Lim Chin Chuan
operations:agenda2021_09_16 [2021/09/16 13:30] (current)
Lim Chin Chuan
Line 24: Line 24:
   * a couple of delays bad issues. The DBBC was problematic today, failed again at about 10 am and lost about an hour, no obvious reason. IF A/B still setup for wideband test.   * a couple of delays bad issues. The DBBC was problematic today, failed again at about 10 am and lost about an hour, no obvious reason. IF A/B still setup for wideband test.
   * flexbuff recording issue. Wasn't recording, needed to kill and restart fs (Jay) - NOt sure why, strange labeling for the recording (a,b,c,d) in the setupaum. During the wideband test, the definition was changed with conflicting definitions. Now setupaum and setupauv will correctly remove the previous datastream definition and not getting this problem.   * flexbuff recording issue. Wasn't recording, needed to kill and restart fs (Jay) - NOt sure why, strange labeling for the recording (a,b,c,d) in the setupaum. During the wideband test, the definition was changed with conflicting definitions. Now setupaum and setupauv will correctly remove the previous datastream definition and not getting this problem.
-  * IFA/IFB changed to record S-band data - previously had been connected to the 3-7 GHz VGOS band. This was toggled through the pduhb.phys.utas.edu.au web interface (JMc) - Can check during setup, to see if s band connects correctly, Jamie will update the observing note.+  * IFA/IFB changed to record S-band data - previously had been connected to the 3-7 GHz VGOS band. This was toggled through the pduhb.phys.utas.edu.au web interface (JMc) - Can check during setup, to see if s band connects correctly, Jamie will update the observing note. Basically, can check the control->outlet- if the "RfSwOnForS" is on.
  
 Kath12: Kath12: