Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:agenda2022_10_13 [2022/10/13 11:28]
Simin Salarpour
operations:agenda2022_10_13 [2022/10/27 11:14] (current)
Earl Lester
Line 1: Line 1:
-** Chair: ** Simin+** Chair: ** Earl
  
-**Next meeting chair: ** Earl+**Next meeting chair: ** Eloise.
  
-**Attended: **  AhmadMarsDavid SchunckJasper, Pradyumna, Lim, JamieEloise +**Attended: **  JasperJamieD. SchnuckEloise, Lim, SiminPrad, D. Smith 
- +**Apologies: **  Ahmad
-**Apologies: ** +
  
  
 **General Issues:** **General Issues:**
  
-**Yg:** +Network security (UTas ITport scans effected drive control connectivityFuture security reviews and access control will probably be impendingdiscuss with UTas IT
-Modules swap issue (3 out of 8 experiments). +
- +
-  * Jamie will contact the yg staff to investigate the problem. +
- +
-**Hb:** +
- +
-  * Jamie has updated the station procedures, sk2prc.py script (used by slogit) and DBBC control files to reflect the wiring changes where the C/D and E/F inputs have been swapped. The main changes from the observing side are that X-band is now connected to IFC and IFD (bbc017-024 and bbc032-032). The samplers command and midob queries should poll the correct samplers and not raise false alarms in the log monitor. Please note that any bad samplers displayed in the multicast window for in E-H can be ignored. Otherwiseall the usual commands and procedures should work but please let me know if you encounter apparent errors.  +
- +
- +
-**Handover issues: ** +
- +
-** AUM055 ** +
- +
-**Hb:** +
-flexbuff-2hb has 35 instead of 36 disks. disk29 is missing (David Schunck) +
- +
-**Ke:** +
-flexbuffke has 35 instead of 36 disks. disk9 is missing (David Schunck) +
- +
-  * Both disks were problematic and needed to be reset. It is important to check disks if they are missing or having issues. Please let Jamie know if you noticed that. +
- +
- +
-** AUM056 ** +
- +
-**Ke:** +
-Experiment not started, drive is not operating (Lim) +
- +
-** R41071 ** +
- +
-**Yg:** +
-dbbc required reconfiguring with v104  (DSmith) +
- +
-** AUA093 ** +
- +
-**Hb:** +
-Error “error m5 -900: not doing record”, turns out there was no space on the recorder. Switched from flexbuff-2hb to flexbuffhb. First good recording after 1447UT (Eloise) +
- +
-  * For the majority of the experiments, the flexbuff-2hb was used but from now on we need to use flexbuff-hb until further notice. +
- +
- +
- +
- +
- +
- +
- +
- +
  
 +26m 'sorta maybe' working (mechanics and drives working), but pointing errors in X-band greater than beam width... ie no signal as yet (need new pointer model), receiver controls not remotely operable either, and SX-receiver coherence not confirmed.