Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:documentation.test_antenna [2021/07/30 16:11]
Jamie McCallum [Generator Status]
operations:documentation.test_antenna [2021/07/30 16:12] (current)
Jamie McCallum [Antenna Controller Clock]
Line 22: Line 22:
 ===== Antenna Controller Clock ===== ===== Antenna Controller Clock =====
  
-The antenna Controller (in the pedestal) gets its time from the NTP server on the local GPS CNS-II clock. If it doesn't know the time, it can't point the antenna. Check the System Monitor display and make sure "Controller clock" is OK. If not, there's a problem. Check the HMI interface on time[hb|ke|yg] and look for the "Current time" section half-way down the right-hand side. MJD should be correct and the seconds should be ticking over. You should also see CLOCK INITIALIZED and SNTP SERVER OK with green backgrounds. If this doesn't look right, consult the On Call person.+The antenna Controller (in the pedestal) gets its time from the NTP server on the local GPS CNS-II clock. If it doesn't know the time, it can't point the antenna correctly. Check the System Monitor display and make sure "Controller clock" is OK. If not, there's a problem. Check the HMI interface on time[hb|ke|yg] and look for the "Current time" section half-way down the right-hand side. MJD should be correct and the seconds should be ticking over. You should also see CLOCK INITIALIZED and SNTP SERVER OK with green backgrounds. If this doesn't look right, consult the On Call person.
  
 ===== Antenna in Remote ===== ===== Antenna in Remote =====